Home Messages Index
[Date Prev][Date Next][Thread Prev][Thread Next]
Author IndexDate IndexThread Index

Re: T3 digitizer gone at bottom of screen

__/ [ Adi Ron ] on Sunday 02 April 2006 18:32 \__

> Our dear friend "Penster" <xxx@xxxxxxx> writes from his dark secret cave:
> 
>> "Doug Herr" <doug@xxxxxxxxxxxxxxx> wrote in message
>> news:pan.2006.04.02.16.37.11.945062@xxxxxxxxxxxxxxxxxx
>>> On Sun, 02 Apr 2006 15:58:02 +0000, Penster wrote:
>>>
>>>> The digitizer is out of alignment in the bottom 5mm of the screen. This
>>>> is
>>>> the bit which has the home/bluetooth/find etc. icons when the screen is
>>>> open. The rest of the screen is fine. Anyone had this problem and have a
>>>> solution? Penster
>>>
>>>
>>> I would backup and do a hard reset myself.  But it sounds more like a
>>> hardware issue to me (and thus, why I would do the hard reset).
>>>
>> Doug
>> Been there, done that, made no difference.
>> Penster
>
> I'm having a similar problem only not that bad, just try to
> recalibrate it to compensate.


There was a similar question a few days ago (over at alt.comp.os.palm).
Thread appended below:


Subject: Screen about 1 cm to the right

__/ [ Roy Schestowitz ] on Monday 27 March 2006 10:37 \__

> __/ [ Cailen ] on Monday 27 March 2006 09:59 \__
> 
>> "Roy Schestowitz" <newsgroups@xxxxxxxxxxxxxxx> schreef in bericht
>> news:e06qun$16vc$3@xxxxxxxxxxxxxxxxxxxx
>>> __/ [ Cailen ] on Sunday 26 March 2006 19:29 \__
>>>
>>>>> "Cailen" <wannaknown@xxxxxxxxxxxxxxxxxxxxxx> schreef in bericht
>>>>> news:44267ece$0$75279$dbd41001@xxxxxxxxxxxxxxxxxx
>>>>>>
>>>>>> This is my next problem....does anybody have a solution?
>>>>>> I have read several forums, but I haven't found an answer yet...
>>>>>>
>>>>>> Cailen
>>>>>>
>>>>>
>>>>> Try recalibrating the screen. Which device do you have?
>>>>>
>>>>
>>>> I have a m505.
>>>> But recalibrating doesn't help because the recalibrating is also outside
>>>> the screenarea....
>>>>
>>>> Cailen
>>>
>>> I am curious. Will a hard-reset (even the data loss 'overkill') give you
>>> another chance to calibrate? What if you tapped as far (near the border)
>>> as
>>> possible and progressively readjusted the digitisation to lie 'within
>>> range'?
>>>
>>> Best wishes,
>>>
>>> Roy
>>>
>>
>> Hi Roy,
>> 
>> That didn't work either.
>> But out of fustration I made a memo with shortcut .1 and let the battery
>> die.
>> After reloading it, it was perfectly fine!!!
>> So I want to thank you for thinking with me!!
>> 
>> Cailen
> 
> *smile* That little lesson will remind me to recalibrate my digitiser often
> enough. Would you believe that I assigned "Prefs" to the ToDo (AKA Tasks)
> physical button of my Tungsten. Reason: Digitizer.
> 
> Best wishes,
> 
> Roy

[Date Prev][Date Next][Thread Prev][Thread Next]
Author IndexDate IndexThread Index