Roy Schestowitz <newsgroups@xxxxxxxxxxxxxxx> writes:
> You must be taking about the hexagonal screws (seen, for example, here:
> http://www.pspilot.de/pppm505/m505_02l.jpg ). You'll need to get a special
> screwdriver for these. I fortunately had one at home as these are fairly
> standardised. Because the screws are rather tight, there is little potential
> for preparing your own screwdriver.
You'll need a Torx T5 screwdriver for these. A correct-size Philips screwdriver
(000, I think) is also highly recommended for the other screws.
-v
|
|