Home Messages Index
[Date Prev][Date Next][Thread Prev][Thread Next]
Author IndexDate IndexThread Index

Re: new monitor not working!

  • Subject: Re: new monitor not working!
  • From: Roy Schestowitz <newsgroups@xxxxxxxxxxxxxxx>
  • Date: Sun, 01 Oct 2006 18:32:04 +0100
  • Newsgroups: alt.os.linux.suse
  • Organization: schestowitz.com / ISBE, Manchester University / ITS / Netscape / MCC
  • References: <1159692434.145876.140350@i3g2000cwc.googlegroups.com> <451f8812$0$6152$3a628fcd@textreader.nntp.hccnet.nl>
  • Reply-to: newsgroups@xxxxxxxxxxxxxxx
  • User-agent: KNode/0.7.2
__/ [ Joost van der Waa ] on Sunday 01 October 2006 10:19 \__

> haseeb.mahmud@xxxxxxxxx wrote:
>> i had a 17'' monitor and recently i have changed that to a 19" . The
>> new one is a Belinea 10 60 75 monitor. Suse dont have the exact driver
>> for my monitor and i lost my display after attaching the monitor. it
>> says 'out of range' message. what to do now?
>> 
>> thanks in advance.
>> 
> Start up in safe mode and then run Sax.

As superuser:

,----[ Command ]
| roy@BAINE:~> sax2
| SaX: root Password: 
| 
| etc.
`----

You should get an ncurses version, I suspect.

If all else fails, you may wish to edit the settings file directly. Here is a
good place to start/press on:

http://xtiming.sourceforge.net/cgi-bin/xtiming.pl

Best wishes and good luck,

Roy

-- 
Roy S. Schestowitz    
http://Schestowitz.com  | Free as in Free Beer ¦  PGP-Key: 0x74572E8E
Load average (/proc/loadavg): 0.81 0.73 0.36 6/136 18841
      http://iuron.com - semantic search engine project initiative

[Date Prev][Date Next][Thread Prev][Thread Next]
Author IndexDate IndexThread Index