__/ [Burnt@ut] on Saturday 17 December 2005 04:23 \__
> On Thu, 15 Dec 2005 17:54:59 +0100, "U. Lachmuth" <ulachmuth@xxxxxx>
>>it's starting again on my T3 ... I can calibrate the digitizer as long
>>as I want, I'm off up to 5mm in the Graffiti area - which is sh*t,
>>especially when you want to hit small buttons like on the onscreen
>>keyboard. Seems to be an old T3 problem, not a year ago my display was
>>changed because of the same problem.
>>Does anyone know if a calibrating tool is in existence somewhere which
>>works in full screen mode?
>>All I know are restricted to the "original" display area/size, even with
>>the slider extruded.
>>Thanks for all hints!
> I use a little utility called digiE (freeware, google it) for this. I
> only need it if I'm going to be doing a bunch of stuff with the slider
> open, which sounds like your problem. It's a wierd little app - keep
> it on a memory card - it can be a problem if you store it in your t3's
I'm beginning to have the same problem with my Tungsten T, having had that
same problem with my M130, which is the main reason it 'retired. The
digitizers are a PITA. If it's of any use, I once wrote about workarounds.
None of them provides a 'magic' solution: