Home Messages Index
[Date Prev][Date Next][Thread Prev][Thread Next]
Author IndexDate IndexThread Index

Re: Tungsten C has loose Stylus - What to do?

  • Subject: Re: Tungsten C has loose Stylus - What to do?
  • From: Roy Schestowitz <newsgroups@schestowitz.com>
  • Date: Thu, 16 Jun 2005 07:39:46 +0100
  • Newsgroups: alt.comp.sys.palmtops.pilot
  • References: <150620052241582846%nobody@nowhere.com> <87y89avqzx.fsf@thalassa.informatimago.com>
  • User-agent: KNode/0.7.2
Pascal Bourguignon wrote:

> Kerry Stevenson <nobody@nowhere.com> writes:
> 
>> My T/C is now about a year old, and the mount for the stylus has
>> gradually become loose. It's so loose that if I hold T/C upside down
>> and give it a little shake the stylus drops out on its own. I have to
>> be very careful or I will lose the stylus. My question: is there a way
>> to tighten up the stylus mount back to its original tension?
> 
> Same problem here. It's the stylus that's used. Buy a new stylus.
> 
> You'd think after twenty years making these devices, they'd have
> solved this problem, but the truth is they don't care!  They got your
> money, why should they care you loose your stylus two years later?

It gets worse. Have a look:

http://hardware.mcse.ms/message196704.html

There is a notoriety to the T-C styli.

Roy

-- 
Roy S. Schestowitz
http://Schestowitz.com

[Date Prev][Date Next][Thread Prev][Thread Next]
Author IndexDate IndexThread Index