__/ [Paul Kean] on Tuesday 07 February 2006 12:25 \__
> G'day,
>
> My TT has stopped responding to screen touches. I took it apart and put
> it back together and it worked for a while, but now it has stopped again.
>
> It still responds to the buttons and hot synchs OK.
>
> Any ideas and how to fix this. I don't want to keep taking it apart.
>
> Thanks,
> ..Paul
> (email is a bogey)
This is probably a mechanical problem, either with the digitiser or some of
its connectivity to your device. It is worth opening the device is keeping
it semi-open for a while. Experiment a little to discover what causes the
issue. If it is the digitiser, it can be replaced. Needs a bit of soldering
though.
Here's an example (apologies for long URL, remove " ..." and subsequent
newline)
http://www.gethightech.com/ ...
Merchant2/merchant.mv?Session_ID= ...
42DD2E2F00006DA90000096E00000000&Screen=PROD&Product_Code=PA1543 ...
&Category_Code=DIG
Hope it helps,
Roy
--
Roy S. Schestowitz | "Did anyone see my lost carrier?"
http://Schestowitz.com | SuSE Linux | PGP-Key: 0x74572E8E
2:35pm up 22 days 9:51, 13 users, load average: 0.59, 0.49, 0.42
http://iuron.com - Open Source knowledge engine project
|
|
